|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Photo IC PNA4S01M Series (PNA4S01M/4S02M/4S03M/4S04M) Bipolar Integrated Circuit with Photodetection Function For infrared remote control systems Features Surface-mouting type for reflow soldering Metal shieldless Space saved by miniaturization Ready for automatic mounting 7.6 (3.8) Unit : mm 5.2 (2.6) 1 2 3.47 R1.7 Absolute Maximum Ratings (Ta = 25C) Parameter Power supply voltage Power dissipation Operating ambient temperature Storage temperature Symbol VCC PD Topr Tstg Ratings - 0.5 to +7 200 -20 to +60 - 30 to +70 Unit V mW C C 3 4 1: VO 2: VCC 3: GND 4: GND Main Characteristics (Ta = 25C VCC = 5V) Parameter Operating supply voltage Current consumption Maximum reception distance Low-level output voltage High-level output voltage Low-level pulse width High-level pulse width PNA4S01M Carrier frequency PNA4S02M PNA4S03M PNA4S04M *1 Symbol VCC ICC Lmax*1 VOL*2 VOH TWL*1 TWH*1 Conditions No signal condition L5.0m, 10L=400A No signal condition L=5.0m, 16Pulse L=5.0m, 16Pulse min 4.7 1.8 5.0 typ 5.0 2.4 0.35 max 5.3 3.0 0.5 VCC 600 600 Unit V mA m V V s s 4.8 200 200 5.0 400 400 36.7 38.0 40.0 56.9 f0 kHz Fig.1 burst wave, L=Lmax, 16 pulses Carrier wave : fo *2 Fig.2 continuous wave, LLmax Carrier wave : fo 400s 400s Fig.1 Fig.2 1 Photo IC PNA4S01M, PNA4S02M, PNA4S03M, PNA4S04M Block Diagram (20k) amplifier AGC B.P.F demodulator comparator VCC RL VO constant voltage peak hold Panasonic Transmitter Specifications LED Transmission unit PNZ323B 10F 20cm V out 10k V out 55mV 10k GND ,,, ,, GND Standard reception unit 10k 10V The light output of the LED transmission unit is adjusted so that the transmission output (V out) of the standard reception unit will be 55 mV when the transmission waveform (duty = 50%) is output from the LED transmission unit. Here, infrared sensitivity (SIR) of PNZ323B is 0.53 A when emission illuminance (H) is 12.45 W/ cm2. The maximum reception distance under these specifications is an assurance that TWH and TWL values will be within the tolerance ranges when 16 consecutive pulses of an optical output equivalent to the maximum reception distance are transmitted by the above transmission unit (The maximum reception distance is measured in the dark without external disturbance noise.) 2 ,, PD integrator PNA4S01M, PNA4S02M, PNA4S03M, PNA4S04M Photo IC L max -- Ta 120 100 B.P.F frequency characteristics (PNA4S02M)* Spectral sensitivity characteristics 100 Relative reception distance L max (%) 100 Relative sensitivity S (%) 80 60 Relative sensitivity S (%) 35 37 39 41 43 80 80 60 60 40 40 40 20 20 VCC = 5V Transmitter : Standard LED Transmission unit used 0 20 40 60 80 100 20 0 - 20 0 33 0 600 700 800 900 1000 1100 1200 Ambient temperature Ta (C ) Carrier frequency (kHz) * The peaks for PNA4S01M, PNA4S08M are all f0. Wavelength (nm) Directivity characteristics 0 100 90 80 70 60 50 40 30 20 10 20 Relative reception distance (%) 30 40 50 60 70 80 90 3 |
Price & Availability of PNA4S01M |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |